Explosion-proof function: through the national authority explosion-proof certification, fully in accordance with the national explosion-proof
Standard production, safe and reliable work in flammable and explosive places.
Safe and reliable: The shell is made of ZL102 alloy die-casting, and the surface is high-pressure electrostatic spray
Plastic. Tempered glass tube, stainless steel exposed fasteners.
High efficiency and energy saving: The lamps are equipped with stainless steel grilles to increase the light efficiency of the lamps and reduce glare.
Easy to install: There is a wiring cavity inside the lamp, and there are special wiring terminals. user
When installing, it can be directly connected to the wire, and it is not necessary to set up a junction box, which is convenient for installation. Replace the lamp
When the tube is used, only the end cap needs to be removed, and the lamp tube can be replaced directly. Steel pipe, cable
The wiring can be used.
Suitable for flammable and explosive places such as petroleum, petrochemical, metallurgy, power plants, ships, etc.
Various indoor work sites and warehouses, platforms, corridors, etc. in combustible and explosive places are used as infields
Fixed lighting use.
IIC explosion-proof grade certification, can work safely in flammable and explosive places;
Using high-quality LED light source, high luminous efficiency, long life
The light is soft, no glare, will not cause the fatigue of the operator's eyes, and improve work efficiency;
Waidi chooses lightweight alloy materials and carries out high-tech spraying treatment, which is wear-resistant, corrosion-resistant, waterproof and dustproof;
The transparent parts are made of imported bulletproof materials, with high light transmittance and good impact resistance, which can make the lamp work normally in various harsh environments;
It has multiple installation methods such as suction page type, wall-mounted type, and boom type to meet the lighting needs of different on-site environments.
Suitable for flammable and flammable places such as petroleum, petrochemical, metallurgy, power plants, etc.;
Various indoor and outdoor lighting opening construction sites and installation facilities;
Places such as equipment tunnels, pedestrian tunnels or corridors.
Meet the lighting needs of inflammable and explosive places such as petroleum, petrochemical, medicine, metallurgy, ships, etc., hazardous places in Zone 1, Zone 2, and explosive gas environment of Group II T1-T5. It is widely applicable to the needs of various flammable and explosive places, installations and various indoor and outdoor operation lighting.
This product has passed the explosion-proof certification of the national authority, has excellent explosion-proof and anti-static effects, and can work safely in various flammable and explosive places;
Modular design can solve the problem of difficult maintenance of traditional LED lamps. Module replacement can be realized without opening the lamps.
This product has passed the explosion-proof certification of the national authority, has excellent explosion-proof and anti-static effects, and can work safely in various flammable and explosive places;
The lighting mode of the lamp can be selected arbitrarily, the spotlight design, the height is high and the illumination distance is far; the floodlight design, can realize the ultra-uniform floodlight, effectively control the glare, and ensure safe production;
Special sealing structure, high-quality impact-resistant bulletproof rubber material and lightweight high-hardness alloy shell, anti-static surface treatment, anti-static, waterproof, shock-proof, and good corrosion resistance, ensuring normal work in various harsh environments and climatic conditions ；
Modular design can solve the problem of difficult maintenance of traditional LED lamps. Module replacement can be realized without opening the lamps.
It is suitable for inflammable and explosive places such as petroleum, petrochemical, metallurgy, and power plants; power gas plants, oil depots, oil wells, plant areas; various indoor and outdoor lighting, construction site lighting and street lighting.
The lamp adopts photoelectric separation design and vertical heat dissipation technology to extend the service life.
The power supply comes with 4KV/6KV anti-surge,
Optional motion sensor,
Suitable for gas stations, toll stations, parking lots, shopping malls and other places.
The lamp adopts photoelectric separation design and vertical heat dissipation technology to extend the service life.
The power supply comes with 4KV/6KV anti-surge,
Optional motion sensor,
Suitable for gas stations, toll stations, parking lots, shopping malls and other places.
High-strength die-cast aluminum housing, integrated design, modularized light source, vertical heat dissipation technology,
Module convection design, module adopts anodic oxidation treatment,
Conducive to LED heat dissipation and improve lamp life,
Optional surge protector, light control, motion sensor,
Suitable for gas stations, toll stations, parking lots, shopping malls and other places.
High-pressure die-cast aluminum, impact resistance and corrosion resistance,
The main body of the lamp adopts a vertical fin design, in which the surrounding hollow 360° fins penetrate each other to enhance gas fluidity and accelerate heat dissipation.
Optional dimming, optional surge protector,
It is suitable for the top lighting of tunnels, garages, exhibition centers, etc.
High-pressure die-cast aluminum, impact resistance and corrosion resistance,
The main body of the lamp adopts a vertical fin design, in which the surrounding hollow 360° fins penetrate each other to enhance gas fluidity and accelerate heat dissipation.
Optional dimming, optional surge protector,
It is suitable for the top lighting of tunnels, garages, exhibition centers, etc.
Aluminum die-cast lamp body, fast and uniform heat dissipation,
Strip rib tempered glass, high strength, soft light,
Ceiling or boom type, convenient and quick installation,
Optional dimming function,
Suitable for gymnasiums, waiting halls, parking lots, etc.
The lamp is simple and beautiful, and fully considers the heat dissipation of the lamp body,
Corrosion-resistant high-pressure cast aluminum lamp body, impact resistance, long service life,
The PC light cover is UV resistant, high light transmittance, and does not change color.
Prismatic structure, uniform light emission without glare,
Optional motion sensor,
Suitable for gas stations, basements, indoor parking lots and other places.
Cast aluminum housing, external power supply, independent radiator,
Choose well-known brand chips and drivers, with superior optical parameters and chromaticity indicators,
Optional motion sensor,
Suitable for gas stations, basements, indoor parking lots and other places.
Cast aluminum housing, corrosion resistance, impact resistance,
Linear power supply design, independent radiator,
Patented design optical grade PC material lens, multi-angle selection, can adapt to a variety of fields scene,
It can be equipped with shallow and deep covers according to different places to reduce glare hazards.
Optional surge protector,
Applicable to factory workshops, shopping malls, supermarkets, toll stations, exhibition centers.
Cast aluminum housing, external power supply, independent radiator,
Optional DMX dimming,
It is suitable for indoor lighting in factory workshops, toll stations and exhibition centers.
One-piece heat-dissipating lampshade, compact and exquisite
Adopt integral aluminum cover radiator and PC cover combination
Protection level: IP20 for the whole lamp
High cost performance
Optional hooks, rings and other installation methods
Application scenarios: factory workshops, shopping malls, supermarkets, toll stations, exhibition centers, etc.
LED WALL PACK Lights with high light efficiency.
Replace metal halide and high pressure sodium for energy-saving with a driver inside.
